Skip to main content

Olympus Provides a Comprehensive Weld Inspection Solution for Pipes With a Diameter as Small as 21.3 MM

Olympus, a world leader in nondestructive testing technologies and pioneer in industrial phased array ultrasound, is pleased to introduce a comprehensive inspection solution for circumferential welds in pipes with a diameter as small as 21.3 mm OD.

A key component of the solution is the COBRA, a new manual scanner specifically designed to
inspect welds in small diameter pipes. The COBRA is used with the OmniScan® MX Phased Array flaw detector with the 16:128 module and the OmniScan MXU software, to provide an economical and portable weld inspection solution.

In addition to its capability of inspecting small diameter pipes, the COBRA one-axis scanner has a very low vertical profile, which allows it to be used in areas with minimal clearance. The total height of the scanner and the probes allow easy rotation around the pipe even when adjacent obstructions such as other pipes, supports, and structures are as close as 12 mm (0.5 in.). The COBRA is spring-loaded and designed to clamp onto carbon steel and stainless steel pipes of various diameters. It is characterized by its smooth-rolling encoded movement enabling precise data acquisition. The scanner can hold two low-profile phased array probes for a complete inspection of the weld in one pass. For pipe-to-component inspections, the scanner can be quickly configured to make one-sided inspections with only one probe. The phased array probes offer optimized elevation focusing, which improves detection of small defects in thin-walled pipes.

The COBRA scanner ensures stable, constant, and strong pressure thus providing good UT signals and precise encoding around the full circumference of the pipe. The scanner is also waterproof, rustproof, and CE compliant.

About Olympus NDT

Olympus NDT is a world-leading manufacturer of innovative nondestructive testing instruments that are used in industrial and research applications ranging from aerospace, power generation, petrochemical, civil infrastructure and automotive to consumer products. Leading edge testing technologies include ultrasound, ultrasound phased array, eddy current, and eddy current array. Its products include flaw detectors, thickness gages, in-line systems, automated systems, industrial scanners, pulser-receivers, probes, transducers, and various accessories. Olympus NDT is also a distributor of remote visual inspection instruments and high speed video cameras in the Americas. Olympus NDT is based in Waltham, Massachusetts, USA, and has sales and service centers in all principal industrial locations worldwide.
Labels:

Popular posts from this blog

Aircraft Visual Inspection

Figure: Boeing 777 aircraft Commercial aircrafts are frequently inspected visually. There is a primary inspection called "walk around check" both in the line and the base, transit checks, daily check, weekly check, A check, B check etc… Line is the more about the quick checks while aircraft is in the park or in between flights. Base is mostly the hanger, where hard checks, repairs take place. A qualified engineer walk around the aircraft and inspect structural items visually. Engine is also checked during the walk around checks. There engineer watches for oil leaks, structural damages in the engine, inlet of the engine for composite parts fixtures to the structure, fan/first stages of the compressor, last stages of the turbine for deterioration or damages , or any unusual changes of the engine. In this example shows how, engineer/Pilot carry on a walk around inspection of a Boeing 777 aircraft. Figure: Walk around inspection of a Boeing 777 1. Left Mid Fuselage
Read more

Eddy current method (ET)

Short research about the history of eddy current The first person to observe current eddies was François Arago (1786-1853), the 25 th president of France, Who was also a mathematician, physicist and astronomer.1824 He discovered what has been called rotatory magnetism, and the fact that most bodies could be magnetized; these discoveries were completed and explained by Michael Faraday (1791-1867). In 1834, Heinrich Lenz stated the principle that defines how the properties of the test objects are communicated back to the test system. Lenz's law states that the direction of current flow in the test object will be such that its magnetic field will oppose the magnetic field that caused the current flow in the test object. This means, in practice, the eddy currents communicate with the test coil by developing secondary flux that cancels a portion of the coil's flux equivalent to the magnitude and phase of the flux developed by the eddy currents.   Léon Foucault (1819-1868) However,
Read more

Eddy current Theory

Eddy current theory is based on electromagnetic induction. That means, a variable magnetic field can induce an electric current on a conductor which is separate to the source of the magnetic field, and also vice versa, which is an electric current generates a magnetic field. Similar theory is used for the magnetic particles inspection as well. Electromagnetic induction is used in many applications such as, Transformers, Electric motors, Generators, etc...   In the field of Non destructive testing (NDT), we manipulate with this theory which I mentioned above, and try to find surface defects or/and shallow internal defects of ferromagnetic materials.
Read more